FieldLink by Red's Engineering

Setup Guide

FieldLink Xtreme

  1. Connect your BaoFeng UV-5R to the SRPT-03 with the included cable.
  2. Attach an external antenna to the SMA connector.
  3. Power on the radio, wait 3 seconds, then press the SRPT-03 power button.
  4. Set radio volume to 75% and adjust as needed.
  5. Secure in the case, lock it, and deploy outdoors.

Note: See the full FieldLink Xtreme manual for details.

SRPT-03 Repeater

  1. Plug the UV-5R Speaker/MIC cable into the SRPT-03 and radio.
  2. Turn on the radio, wait 3 seconds, then power on the SRPT-03.
  3. Adjust volume to 75% and fine-tune.

Note: See the full SRPT-02/03 manual for details.

SRPT-02 Repeater

  1. Connect the UV-5R to the SRPT-02 with the provided cable.
  2. Power on the radio, wait 3 seconds, then activate the SRPT-02.
  3. Set volume to 75% and tweak as necessary.

Note: See the full SRPT-02/03 manual for details.